This will help you unbrick Nothing Phone 1, fix software issues like a boot loop, or get rid of custom ROMs. If the connect is good it will show up in the command window stock firmware ROM. To install the OTA file, use the following command in the CMD window (inside platform-tools). To continue, get the Pixel 7/7 Pro OTA image (and not the Factory Image). Transfer the firmware file to your computer’s platform-tools folder. Also, change the extension to.zip and the name to update.

  • Once done, it’ll complete its setup process and you’ll need to click through the disclaimer.
  • However, you are only limited to back up against your allotted free storage quota, unless you choose “High Quality” as the Upload size.
  • So, if you want to make full use of this tool, download the most recent version of the SP Flash tool from the link below and get started.
  • If you have any queries relating to the aforementioned steps, do let us know in the comments section below.
  • If in case, your device runs out of power during Android ROM backup or device backup, it may harshly impact the device.

If you choose not to install TWRP Recovery, you must extract boot.img from stock firmware and use Magisk to patch it. Generally Nandroid Backup is created using CWM recovery. But my procedure is very simple by using which you can easily create nandroid backup without cwm/custom recovery. If getting any problem in above method then just clear the data of the app and then try again. In most of the devices the data doesn’t gets deleted while installing custom firmware so titanium backup method is good for those mobiles. Since backup through titanium backup is a time taking process so you can try this method but try at your own risk.

backup stock rom without twrp

If you remove TWRP and you get back to stock recovery somehow then you might get your phone warranty back. Now you have everything ready to install a custom ROM, we can begin the process. You can select to reboot the System (Android), to Power Off, to reboot Recovery, or to boot to the Bootloader. This powers on the device but boots no software, and allows you to access a bricked device via a USB connection to your PC.

  • Second, on your PC from the command prompt you will need to be able to locate both the adb command and your backup file.
  • It can be used to flash a custom ROM or use minor app mods, as well as to create and manage backups.
  • So by now, you have been able to download SP Flash Tool and learned how to use it to flash the stock ROM on your MediaTek device.

This is necessary as implementing such complicated flashing is risky and may increase the possibility of soft bricking your phone. Besides, I always recommend our all Android users make a complete backup of their custom/stock firmware before executing any flashing process. So here’s an all-around tutorial to help you backup Android devices completely, from apps to complete firmware, we have got you covered.